巨箭JUKAM > g-988 >硅酮膠產品描述>巨箭jukam g-988專業研發部門的有機硅粘合劑的硅膠和塑料，電木粘接，硅膠與硅膠、硅膠、硅膠與金屬、玻璃、陶瓷、塑料、玻璃和金屬，在脆性，發白等問題克服傳統的膠粘劑，膠粘劑的透明、環保、無刺激性缺陷，無異味！Jujube JUKAM> g-988> Silicone Rubber Product Description> Jaram jukam g-988 professional R & D department silicone adhesive silicone and plastic, bakelite, silicone and silica gel, silicone, silicone and metal, glass , Ceramics, plastic, glass and metal, in the brittle, white and other issues to overcome the traditional adhesive, adhesive transparent, environmentally friendly, non-irritating defects, no smell!主要用于：硅膠、塑料、金屬、玻璃、陶瓷及木材粘接。Mainly used for: silicone, plastic, metal, glass, ceramic and wood bonding.四、產品特性：膠體固化為軟彈性狀態，韌性?xún)?yōu)良，可彎曲、不白、強度高、溫度低！具有防水、防潮、耐油、抗老化、抗震動、絕緣等特點！>Fourth, the product features: colloid curing soft elastic state, excellent toughness, can be bent, not white, high strength, low temperature! With waterproof, moisture, oil, anti-aging, anti-vibration, insulation and other characteristics! >五、操作說明書>對粘接材料表面，一般的清潔，涂后立即粘合，膠層在0.05-0.2mm層厚度、溫室8-15分鐘干燥的位置，24小時可完全固化；在粘合后在50°—150°之間的干燥4-12小時固化，可以達到更好的效果！在測試強度之前，請務必等待24小時！>5, operating instructions> on the surface of the adhesive material, the general clean, coated immediately after the adhesive layer in the 0.05-0.2mm layer thickness, the greenhouse 8-15 minutes dry position, 24 hours can be completely cured; after bonding Drying between 50 ° -150 ° C for 4-12 hours can achieve better results! Be sure to wait 24 hours before testing strength! >六、> 90ml / 330毫升/公司包裝規格>Six,> 90ml / 330ml / company packaging specifications七，保質期：儲存于陰涼干燥處，遠離火源；有效期：6-8個月（溫室）Seven, shelf life: stored in a cool dry place, away from fire; Valid: 6-8 months (greenhouse)